August 20072-633WorkCentre 5687 Family 11-465-171 to 11-468-171Status Indicator RAPs11-465-171 to 11-468-171 Paddle Unit Position RAP11-465-171 The paddle unit has failed to return to the upper position.11-466-171 The paddle unit has failed to move from the upper position.11-467-171 The paddle unit has failed to return to the lower position.11-468-171 The paddle unit has failed to move from the lower position.Initial ActionsCheck for damage or obstructions that would prevent the paddle unit from operating correctly.ProcedureWARNINGSwitch off the electricity to the machine, GP 14. Disconnect the power cord from thecustomer supply while performing tasks that do not need electricity. Electricity cancause death or injury. Moving parts can cause injury.NOTE: All HVF BM interlocks must be made to supply +24V to the motors.Enter dC330, code 11-027 paddle unit motor, MOT11-027, Figure 1. Select code 11-027 andpress Start. The motor runs.Y NGo to Flag 2. Check MOT11-027.Refer to:• GP 10, How to Check a Motor.• P/J202, HVF control PWB.• 11A-171, HVF Power Distribution RAP.Install new components as necessary:• Paddle unit motor, PL 11.150.• HVF control PWB, PL 11.157 Item 2.Enter dC330, code 11-027 to check the paddle unit motor, MOT11-027, Figure 1. The paddleunit moves.Y NCheck the drive gears on the paddle unit. Install new components as necessary. PL11.145 Item 2.Enter dC330, code 11-194 paddle unit upper sensor, Q11-194. Select code 11-194 and pressStart. Select code 11-027 and press Start. The sensor status changes.Y NGo to Flag 1. Check Q11-194.Refer to:• GP 11 How to Check a Sensor.• P/J201, HVF control PWB.• 11A-171, HVF Power Distribution RAP.Install new components as necessary:• Paddle unit upper sensor, PL 11.145.• HVF control PWB, PL 11.157 Item 2.Enter dC330, code 11-195 paddle unit lower sensor, Q11-195. Select code 11-195 and pressStart. Select code 11-027 and press Start. The sensor status changes.Y NGo to Flag 3. Check Q11-195.Refer to:• GP 11 How to Check a Sensor.• P/J201, HVF control PWB.• 11A-171, HVF Power Distribution RAP.Install new components as necessary:• Paddle unit lower sensor, PL 11.145.• HVF control PWB, PL 11.157 Item 2.Perform SCP 6 Final Actions.AA
