Xerox WorkCentre 5687 Series Service Manual

Contents

Xerox WorkCentre 5687 Series Service Manual Manual pdf 562 page image

August 20072-370 WorkCentre 5687 Family11D-120, 11E-120Status Indicator RAPs11D-120 1K LCSS to Machine Communications InterfaceRAPAll communications between the machine and 1K LCSS are conducted through a single inter-face cable.ProcedureCheck the 1K LCSS PWB DIP switch settings, refer to 11E-120 1K LCSS PWB DIP SwitchSettings RAP.Go to 03-360, 03-408 to 03-410, 03-418 IOT to Output Device Error Rap.11E-120 1K LCSS PWB DIP Switch Settings RAPTo show the correct settings for the DIP switches on the 1K LCSS PWB.ProcedureProblems that can result from incorrect DIP switch settings are:• False jam clearance instructions for the 1K LCSS and/or the machine exit area.• Communication errors between the 1K LCSS and machine.• Erratic behavior of the 1K LCSS.Check the DIP switch settings, Figure 1. If necessary, switch off the machine, GP 14. Correctthe DIP switch setting, then switch on the machine, GP 14.Figure 1 DIP switch settings