August 20072-477WorkCentre 5687 Family 11-110-170Status Indicator RAPs11-110-170 Hole Punch Jam RAP11-110-170 A sheet is late arriving at the punch position sensor.ProcedureEnter dC330, code 11-110. Actuate the punch sensor, Q11-110, Figure 1. The displaychanges.Y NGo to Flag 1. Check the sensor Q11-110.Refer to:• GP 11, How to Check a Sensor.• P/J420, HCSS PWB.• 11C-170 HCSS BM Power Distribution RAP.Install new components as necessary:• Punch sensor, PL 11.70 Item 9.• HCSS PWB, PL 11.92 Item 5.Enter dC330, code 11-348. Actuate the chad bin level sensor, Q11-348, Figure 1.NOTE: The chad bin collects the pieces of paper (chad) cut out by the punch. The chad binmust be correctly installed for the chad bin level sensor to operate.The display changes.Y NGo to Flag 2. Check the sensor Q11-348.Refer to:• GP 11 How to Check a Sensor.• P/J422, HCSS PWB.• 11C-170 HCSS BM Power Distribution RAP.Install new components as necessary.• Chad bin level sensor, PL 11.66 Item 8.• HCSS PWB, PL 11.92 Item 5.Perform SCP 6 Final Actions.Figure 1 Component locationPunch sensor,Q11-110Chad bin levelsensor, Q11-348
