August 20072-414 WorkCentre 5687 Family11-199-130, 11-300-130, 11-303-130, 11-304-130, 11-Status Indicator RAPs11-199-130 Unexpected Sheet in the HCSS RAP11-199-130 An unexpected sheet has been detected in the HCSS.Initial ActionsEnsure the HCSS is correctly docked to the machine and all interlocks are closed.ProcedureGo to the OF8 Multifeed RAP.11-300-130, 11-303-130, 11-304-130, 11-305-130 InterlocksRAP11-300-130 The docking interlock has opened during run mode.11-303-130 The front door interlock has opened during run mode.11-304-130 The upper exit gate interlock has opened during run mode11-305-130 The lower exit gate interlock has opened during run mode.Initial Actions• Ensure the HCSS is correctly docked to the machine and all interlocks are closed.• Go to the OF12 Output Device Undocked RAP and complete the procedure.ProcedureGo to the appropriate RAP:• 11-300-130 Docking Interlock RAP.• 11-303-130 Front Door Interlock RAP.• 11-304-130 Upper Exit Gate Interlock RAP.• 11-305-130 Lower Exit Gate Interlock RAP.11-300-130 Docking Interlock RAPCheck the docking interlock switch, S11-300 and docking pivot interlock switch, S11-300A, Fig-ure 1.• Check the switch actuator mounted on the machine is correctly installed and not dam-aged.• Enter dC330, code 11-300. Actuate the switches and check the display.NOTE: The switches are connected in series. Both switches must be actuated for the dis-play to change.Refer to:– Flag 1.– GP 13 How to Check a Switch.– P/J434, HCSS PWB.• Check the wiring between the HCSS power supply and the docking interlock switch, Fig-ure 3, refer to GP 7.• If necessary, install new components:– Docking interlock switch, PL 11.34 Item 3.– Docking pivot interlock switch, PL 11.34 Item 5.11-303-130 Front Door Interlock RAPFigure 1, check the front door interlock switch, S11-303:• Check the switch actuator on the inside of the front door is not damaged.• If the door does not remain closed, install a new door, PL 11.30 Item 5.• Enter dC330, code 11-303 actuate the switch and check the display.
