Printing on Specialty MediaPhaser® 6180MFP Multifunction Printer5-25Printing on Specialty MediaThis section includes:■ Printing Transparencies on page 5-25■ Printing Envelopes on page 5-28■ Printing Labels on page 5-31■ Printing Glossy Paper on page 5-36■ Printing Custom Size or Long Paper on page 5-41Printing TransparenciesTransparencies can only be printed from Tray 1 (MPT). They should be printed on one sideonly. For best results, use only recommended Xerox transparencies.To order paper, transparencies, or other specialty media, contact your local reseller or go towww.xerox.com/office/6180MFPsupplies.Caution: Damage caused by using unsupported paper, transparencies, and other specialtymedia is not covered by the Xerox warranty, service agreement, or Total SatisfactionGuarantee. The Total Satisfaction Guarantee is available in the United States and Canada.Coverage may vary outside these areas; please contact your local representative for details.See also:Recommended Media List (North America)Recommended Media List (Europe)Guidelines■ Remove all paper before loading transparencies in the tray.■ Do not load more than 25 sheets in Tray 1 (MPT). Overloading the tray may cause theprinter to jam.■ Handle transparencies by the edges using both hands to avoid fingerprints and creases,which may cause poor print quality.■ Fan transparencies before loading in the paper tray.This section explains how to print on transparencies.
