Print After Checking Printing Result - Proof PrintPhaser® 6180MFP Multifunction Printer5-46Print After Checking Printing Result - Proof PrintAbout Proof PrintProof Print is a feature that allows you to store the print data of multiple copies in the memory,print out only the first set to check the print result and if satisfactory, print the remainingcopies from the control panel.Note: Proof print data that has become redundant can be deleted using the control panel. SeePrinting from the Control Panel on page 5-45. To delete all proof print data that has becomeredundant, see System Settings on page 9-15. The secure print jobs stored in the RAM disk areerased when the printer is switched off.Configuring Proof PrintSet the Proof Print settings at the computer and send data to the printer for printing. Then,carry out the output procedure at the printer to output the printed pages.Printing from the ComputerThis section explains the procedure using WordPad on Windows XP as an example.The way to display the printer Properties dialog box differs according to the applicationsoftware. Refer to the manual of your application software.To configure Proof Print using the PCL or PostScript print driver:1. In the Job Type field, select Proof Print.2. Click the Setup button.3. In the Username field, enter your user name.4. If you want to use a specified document name to access the document from the controlpanel:a. In the Retrieve Document Name field, select Enter Document Name.b. In the Document Name field, enter the name that will appear on the control panel.5. If you want the printer to automatically name the document using the application'sdocument name, in the Retrieve Document Name field, select Auto Retrieve.
