Setting Paper Types and SizesPhaser® 6180MFP Multifunction Printer5-9Setting Paper Types and SizesSetting Paper TraysWhen loading paper in Tray 2 or the 550-Sheet Feeder (optional), it is necessary to set thepaper type on the control panel.When loading paper in Tray 1 (MPT), set the paper size and type on the control panel whenprinting. When MPT Mode has been set to Panel Specified (default) on the control panel, youcan set the paper size and type on the control panel.This section describes how to set the paper size and type on the control panel.Note: When you set MPT Mode to Panel Specified, printing will be performed only whenthe settings for the paper size and type configured on the print driver match the settings on thecontrol panel. When the settings on the print driver and control panel do not match, follow theinstructions displayed on the control panel.You can also display the message to set the paper size and type on the control panel every timeyou load paper into each tray.See also:Description of Menu Items on page 9-4Setting Paper TypesCaution: Paper type settings must match those of the actual paper loaded in the trays.Otherwise, print-quality problems can occur.1. Press the System button to display the Setup screen.2. Select Tray Settings, and then press the OK button.3. Select the tray, and then press the OK button.4. Select Paper Type, and then press the OK button.5. Select the correct paper type for the loaded paper, and then press the OK button.Setting Paper Sizes1. Press the System button to display the Setup screen.2. Select Tray Settings, and then press the OK button.3. Select the tray, and then press the OK button.4. Select Paper Size for Custom Size only, and then press the OK button.Note: Select Driver Specified when you set a custom size paper from Tray 1 (MPT).
