User SafetyPhaser® 6180MFP Multifunction Printer1-3If you notice unusual noises or odors:1. Turn off the printer immediately.2. Disconnect the power cord from the electrical outlet.3. Call an authorized service representative to correct the problem.The power cord is attached to the printer as a plug-in device at the back of the printer. If it isnecessary to disconnect all electrical power from the printer, disconnect the power cord fromthe electrical outlet.Warning: Do not remove the covers or guards that are fastened with screws unless you areinstalling optional equipment and are specifically instructed to do so. Power should be OFFwhen performing these installations. Except for user-installable options, there are no parts thatyou can maintain or service behind these covers.Note: Leave the printer on for optimum performance; it does not pose a safety hazard. Ifhowever the printer will not be used over an extended period of time, it should be turned offand unplugged.The following are hazards to your safety:■ The power cord is damaged or frayed.■ Liquid is spilled into the printer.■ The printer is exposed to water.If any of these conditions occur, do the following:1. Turn off the printer immediately.2. Disconnect the power cord from the electrical outlet.3. Call an authorized service representative.Caution: To reduce the risk of fire, use only No. 26 American Wire Gauge or largertelecommunication line cord.Laser SafetyWith specific regard to lasers, this printer complies with laser product performance standardsset by governmental, national, and international agencies and is certified as a Class 1 LaserProduct. The printer does not emit hazardous light because the beam is totally enclosed duringall modes of customer operation and maintenance.
