Basic CopyingPhaser® 6180MFP Multifunction Printer6-2Basic CopyingUse either the document glass or the document feeder to make copies. Load the originals to becopied and follow the steps below to make copies. To clear the settings from the previous job,press the Clear All button once.1. On the control panel, press the Copy button.2. Enter the desired number of copies using the control panel keypad. The number of copiesappears on the upper, right corner of the display. To reset the number of copies to 1, pressthe Clear All button.3. Set copying options. See Adjusting Copying Options on page 6-3.4. Press the Start button.If you placed originals in the document feeder, copying continues until the documentfeeder is empty.Note: Print jobs are interrupted when users make copies. Printing continues while the printerscans the originals. When the copies are ready to print, the print job pauses, the copies print,and then the print job resumes. Copying cannot be made while printing a received fax.Document GlassLift the document feeder or the document glasscover, and then place the original facedown onthe back, left corner of the document glass.Document FeederInsert originals faceup with the top of the pageentering the feeder first. Adjust the paperguides so they fit against the originals.6180mfp-040 6180mfp-041XEROX
