Adjusting Scanning OptionsPhaser® 6180MFP Multifunction Printer7-18Adjusting Scanning OptionsThis section includes:■ Adjusting the Default Scan Settings on page 7-18■ Changing the Scan Settings for an Individual Job on page 7-21Adjusting the Default Scan SettingsThis section includes:■ Setting the Color Mode on page 7-18■ Setting the Scan Resolution on page 7-19■ Setting the Original Type on page 7-19■ Setting the Scanned Image File Type on page 7-20■ Setting the Original Size on page 7-20■ Automatically Suppressing Background Variations on page 7-20For a complete list of all of the default settings, see Default Settings on page 9-4.Setting the Color ModeYou can scan an image in color or in black and white. Selecting black and white significantlyreduces the file size of the scanned images. An image scanned in color will have a larger filesize than the same image scanned in black and white.1. Press the System button.2. Select Default Settings, and then press the OK button.3. Select Scan Defaults, and then press the OK button.4. Select Color, and then press the OK button.5. Change the color setting to either Color or Black & White, and then press the OK button.To change the color mode temporarily, press the Color Mode button on the control panel.CopyFaxE-mailScanColor ModeB&WColorOKJob in MemoryJob StatusABCGHIPQRSRedial/Pause Speed Dial-_~TUV WXYZJKL MNO@:./1 2 34 5 67 80C#9DEFSystemManual Dial6180mfp-048
