Power Saver ModesPhaser® 6180MFP Multifunction Printer2-10Power Saver ModesPower Saver Mode 1 (Printer)The printer is equipped with Power Saver Mode 1 to reduce power consumption when it is leftidle.When no print data is received for 30 minutes (default), the printer will enter Power SaverMode 1.The time range that can be specified for the printer to enter Power Saver Mode 1 is5 to 60 minutes. Consumption of power during Power Saver Mode 1 is 35 W or less and thetime required to exit from Power Saver Mode 1 to a print-ready status is about 20 seconds.See also:Changing the Power Saver Time on page 9-3Exiting the Power Saver ModeThe printer automatically cancels Power Saver Mode 1 if the scanner lid is raised, any controlpanel buttons are pressed, or if it receives data from the computer.Power Saver Mode 2 (System)Power Saver Mode 2 controls the scanner lamp. When the scanner is not being used, the lampturns off after the time specified for Power Saver Mode 2. The time range that can be specifiedfor the printer to enter Power Saver Mode 2 is 5 to 120 minutes. Consumption of power duringPower Saver Mode 2 is 17W. The default setting for Power Saver Mode 2 is 30 minutes afterPower Saver Mode 1 starts.The printer automatically cancels Power Saver Mode 2 once it receives data from thecomputer. To cancel the Power Saver Mode 2 manually, press the Wake Up button.See also:Changing the Power Saver Time on page 9-3
