Xerox Phaser 6180MFP User Manual

Also see for Phaser 6180MFP: Brochure & specs User guide Features setup guide Supplementary guide Supplementary guide

Contents

Xerox Phaser 6180MFP User Manual Manual pdf 204 page image

Print QualityPhaser® 6180MFP Multifunction Printer10-20Print QualityThis section includes:■ Print-Quality Problems on page 10-20■ Copy-Quality Problems on page 10-24■ Color Registration on page 10-25Print-Quality ProblemsWhen the print quality is poor, select the closest symptom from the following table to correctthe problem.If the print quality does not improve after carrying out the appropriate action, contact XeroxCustomer Support or your reseller.Symptom Reason/ActionFaded printouts Multiple colors faded:■ The print cartridges are not Xerox print cartridges.Verify that the print cartridges (C/M/Y/K) are genuine Xerox cartridges,and replace if necessary.■ The paper is outside the recommended specification range.Replace the media with a recommend size and type, and confirm thatyour control panel settings are correct. See About Paper on page 5-6.■ The paper is damp.Replace the paper. See About Paper on page 5-6.■ The transfer unit is old or damaged.Replace the transfer unit.■ The high-voltage supply is defective.For assistance, go to the Xerox Support website:www.xerox.com/office/6180MFPsupport.Only one color faded:Check the condition of the print cartridge, and replace as necessary.