Selecting Fax Options for Single JobsPhaser® 6180MFP Multifunction Printer8-12Making the Image Lighter or DarkerTo lighten or darken an image when it is faxed:1. On the control panel, press the Fax button.2. Select Lighten/Darken, and then press the OK button.3. Press the Forward Arrow or Back Arrow to lighten or darken the fax, and then press theOK button.Note: The factory default is Normal.Delay Sending a FaxTo send a fax at a specified time (within 24 hours):1. On the control panel, press the Fax button.2. Select Delayed Start, and then press the OK button.3. Select On, and then press the OK button.4. Select the time to send the fax:■ Select a number from 0 to 23 for the hour, and then press the Forward Arrow orBack Arrow button to select minutes.■ Select a number from 0 to 59 for minutes, and then press the OK button.5. Press the Start button.The fax is scanned and saved to be sent at the time you specified.Enabling Color FaxTo enable the sending of a color fax:1. Press the System button.2. Select Admin Menu, and then press the OK button.3. Select Fax Settings, and then press the OK button.4. Select Color Fax, and then press the OK button.5. Press the Up Arrow or Down Arrow to change the setting to On.6. Press the OK button.Note: Changing the Color Fax setting requires that the printer be turned off, and then onagain.When faxing, press the Color Mode button to switch between Black and White mode andColor mode.Note: The factory default for Color Fax is Off.
