Adjusting Copying OptionsPhaser® 6180MFP Multifunction Printer6-6Image AdjustmentsYou can change the following image adjustment settings:■ Reducing or Enlarging the Image on page 6-6■ Making the Image Lighter or Darker on page 6-6■ Adjusting the Sharpness on page 6-7■ Adjusting the Color Saturation on page 6-7■ Setting Auto Exposure on page 6-8■ Adjusting Color Balance on page 6-8See also:Selecting the Default Copy Settings on page 6-5Reducing or Enlarging the ImageYou can reduce the image to 25% of its original size or enlarge it to 400% of its original size.To reduce or enlarge the image:1. On the control panel, press the Copy button.2. Select Reduce/Enlarge, and then press the OK button.3. Select one of the following options:■ Use the Up Arrow or Down Arrow to select a preset image size, and then press theOK button.■ Press the Back Arrow button, and then use the Back Arrow or Forward Arrowbuttons to set the copy size, and then press the OK button.Note: The factory default is 100%.Making the Image Lighter or DarkerTo lighten or darken an image when it is copied:1. On the control panel, press the Copy button.2. Select Lighten/Darken, and then press the OK button.3. Press the Back Arrow or Forward Arrow button to lighten or darken the image, and thenpress the OK button to confirm the setting.
