Print QualityPhaser® 6180MFP Multifunction Printer10-25Color RegistrationColor registration can be adjusted by the printer automatically, or you can manually adjust it.Color registration should be adjusted any time the printer is moved.Automatic Color Registration AdjustmentUse the following procedure to perform automatic color registration adjustment.Note: An automatic color registration adjustment is performed every time a new printcartridge is installed.1. Press the System button to display the Setup screen.2. Press the Up Arrow or Down Arrow button until Admin Menu appears, and then pressthe OK button.3. Press the Up Arrow or Down Arrow button until Maintenance appears, and then pressthe OK button.4. Press the Up Arrow or Down Arrow button until Adjust Color Regi appears, and thenpress the OK button.5. Press the Up Arrow or Down Arrow button until Auto Correct appears, and then pressthe OK button.6. Select Yes, and then press the OK button.Moiré pattern(undesirable pattern inthe halftone) inStandard mode copiesStandard ModeEnhanced ModeThe output quality mode is set to Standard.Change the output quality mode to Enhanced.Note: Enhanced mode copies may take a couple of seconds longer tomake.For information on changing the output quality mode for a single job, seeOutput Quality on page 6-12. For instructions on changing the defaultoutput quality mode setting, see Selecting the Default Copy Settings onpage 6-5.Symptom Reason/Action
