Xerox Phaser 6180MFP User Manual

Also see for Phaser 6180MFP: Brochure & specs User guide Features setup guide Supplementary guide Supplementary guide

Contents

Xerox Phaser 6180MFP User Manual Manual pdf 135 page image

Scanning to a FTP ServerPhaser® 6180MFP Multifunction Printer7-13Scanning to a FTP ServerThe printer can scan an image, and then send it to an FTP server using FTP.Creating an Address for the ScannerBefore scanning, you must create an address for your printer to scan to. There are two ways tocreate the address:■ Using CentreWare IS to create the address■ Using the Xerox Address Book Editor to create the addressUsing CentreWare IS to Create an AddressTo configure the address using CentreWare IS:1. Launch your web browser.2. Enter your printer’s IP address in the browser’s Address field.3. Click the Address Book button.4. Under Server Address Book, click Individual Directory.5. In the Directory Listing, click the Add button of any blank address.6. Fill in the rest of the information for the FTP server:a. In the Name field, enter the name that you want this address to appear under in theAddress Book.b. In the Server Address field, enter the IP address of the FTP server.c. The port number only needs to be specified if the FTP server is not using the defaultport.d. If the FTP server requires you to login, enter the name and password in the appropriatefields.e. Leave the Share Name and Server Path fields blank.7. Click the Save Changes button to create the new address.