Managing Fax FunctionsPhaser® 6180MFP Multifunction Printer8-15Enabling or Disabling Secure FaxesWhen the Secure Receive Lock option is enabled, a password is required before faxes can beprinted or removed.To enable or disable Secure Receive Lock:1. On the control panel, press the System button.2. Select Admin Menu, and then press the OK button.3. Select Secure Settings, and then press the OK button.4. Select Panel Lock, and then press the OK button twice.5. Select Enable, and then press the OK button.6. Press the Exit button one time.7. Select Secure Receive Lock, and then press the OK button twice.8. Select one of the following options, and then press the OK button:■ Disable: This option turns off the Secure Receive Lock option if it is on.■ Enable: This option turns on the Secure Receive Lock option if it is off.9. If you want to change your password, select Change Password, and then press theOK button.10. Enter a new four digit password, and then press the OK button.Note: The default password is 0000.Printing Secure FaxesIf the Secure Receive Lock option is enabled, you must enter your numeric password to print areceived fax.To print or clear all secure faxes:1. On the control panel, press the Job Status button.2. Select Walk-Up Features, and then press the OK button.3. Select Secure Receive, and then press the OK button.4. When prompted, enter your four-digit password, and then press the OK button.The received faxes are printed.
