Installing the Printer DriversPhaser® 6180MFP Multifunction Printer4-11Windows 2000 or LaterTo install the printer driver from the Software and Documentation CD-ROM:1. Insert the CD-ROM into the computer’s CD-ROM drive. If the installer does not launch,do the following:a. Click Start, and then click Run.b. In the Run window, type: :\INSTALL.EXE.2. Select your desired language from the list.3. Select Install Printer Driver.4. Select the installation method you want to use, and then follow the onscreen instructions.Note: PrintingScout is a separate option from the printer driver. To install PrintingScout, usethe Software and Documentation CD-ROM.See also:Online Support Assistant at www.xerox.com/office/6180MFPsupportMacintosh OS X, Version 10.2 and HigherSet up your printer using Bonjour (Rendezvous), create a desktop USB connection, or use anLPD/LPR connection for Macintosh OS X, version 10.2 and higher.Macintosh OS X, Version 10.2 and 10.3To install the printer driver from the Software and Documentation CD-ROM:1. Insert the CD-ROM into the CD-ROM drive and select the VISE installer to install theprinter software.2. When installation is complete, select one of the following options:■ Open the Print Center utility for Mac OS X, version 10.2.x.■ Open the Printer Setup Utility for Mac OS X, version 10.3.x.Note: To locate utilities on the Macintosh hard drive, open the Applications folder, andthen open the Utilities folder.3. Confirm that the first drop-down menu is set to Bonjour (Rendezvous).4. Select the printer in the window.5. Select Xerox from the list of manufacturers in the lower drop-down menu.6. Select the appropriate printer model from the list of available devices.7. Click the Add button.See also:Online Support Assistant at www.xerox.com/office/6180MFPsupport
