Control Panel Error MessagesPhaser® 6180MFP Multifunction Printer10-32Control Panel Error MessagesThis section describes the messages displayed on the control panel.Messages About SuppliesMessage Condition/Reason/Action010-351Replace FuserTime to replace the fuser.Replace the old fuser with a new one.010-359Fuser ID ErrorThe fuser is not installed correctly or is not working correctly dueto damage or malfunction.Reinstall the fuser.010-317Insert FuserThe fuser is not installed.Install the fuser.093-NNNXXX Cart. ErrorThe XXX print cartridge is not installed correctly or is not workingcorrectly due to damage or malfunction.Reinstall the print cartridge.093-NNNCheck XXX CartSealing tape is still attached to the XXX print cartridge.Remove the sealing tape from the displayed print cartridge.093-NNNXXX Cart. ErrorThe XXX print cartridge is not installed correctly or is not workingcorrectly due to damage or malfunction.Reinstall the print cartridge.See Checking or Managing the Printer with CentreWare IS onpage 11-6.094-320Transfer Unit ErrorThe transfer unit is not installed correctly or is not workingcorrectly due to damage or malfunction.Reinstall the transfer unit.CRUM ErrorError 094-330Reseat Transfer UnitThe transfer unit is not seated correctly.Reseat the transfer unit.Install XXXPrint CartridgeThe XXX print cartridge is not installed.Install the XXX print cartridge.See Checking or Managing the Printer with CentreWare IS onpage 11-6.InsertTransfer UnitThe transfer unit is not installed.Install the transfer unit.XXX CRUM ErrorError 093-9NNThe print cartridge needs to be replaced.Replace the indicated print cartridge, either Yellow, Magenta,Cyan, or Black.
