Keysight N9923-90001 User’s Guide231System SettingsLAN SettingsLAN SettingsConfigure the LAN settings to be used to communicate with the Data LinkSoftware. Learn more about Data Link at:www.keysight.com/find/fieldfoxsupport.How to configure LAN settingsThe first three ‘Current...’ settings can NOT be edited.— Press System 7.— Then System Configuration.— Then LAN.— Use the arrows to select one of the following, then press Ed it.— Hostname Change the name that can be used to address the FieldFox ifyour server supports this feature. The default hostname is generatedautomatically.— Obtain IP Choose from:Table 14-1 LAN LEDs (Applies to N9912A units with serial number prefixes ≥5607)LAN LEDs (Applies to N9912A units with serial number prefixes ≥5607)When FieldFox is connected to the LAN, the flashing LAN LEDs have the followingdefinitions:Green: Flashing indicates packets are being transferred.Yellow:— Flash, pause = 10 Mbit link speed— Flash, flash, pause = 100 Mbit link speed— Flash, flash, flash, pause = 1 GBit link speed
