Keysight N9923-90001 User’s Guide217System SettingsPreferencesStartup ModeThe Startup Mode setting determines the mode that becomes active (visible)when User Preset is set to OFF (Factory Preset) and the FieldFox is poweredON. See “User Preset” on page 209.How to setup Startup Mode— Press System 7— Then Preferences— Then Preferences— Thenscrollto Global Settings > Startup Mode and press Ed it.— Then repeatedly press the Startup Mode to scroll through the availablechoices.— is the factory default mode for your FieldFox model.—Built-in Power Meter Mode is NOT allowed as a Startup Mode.DisplayChoose the Display values (Display Colors, Trace Width, Brightness, TitleEnabled, Title). See “Display Settings” on page 211.How to select Display values:— Press System 7— Then Preferences— Then Preferences— Then use arrow softkeys or the knob to select Display— Then Ed it for each of the following:— DisplayColors— Indoor(default)— NightVision— OutdoorSun— OutdoorDusk— Outdoor Clouds— TraceWidth— Normal(default)— Wide— Brightness
