Keysight N9923-90001 User’s Guide229System SettingsSystem Configuration— Press Done to exit the Date and Time settings. The readout in theupper-right corner of the FieldFox screen will update accordingly.LAN SettingsConfigure the LAN settings to be used to communicate with the Data LinkSoftware and connect to the FieldFox for remote SCPI operation. Learn moreabout Data Link at: www.keysight.com/find/fieldfoxsupport.How to configure LAN settingsThe first three ‘Current...’ settings can NOT be edited.— Press System 7.— Then System Configuration.— Then More.— Then LAN.— Use the arrows to select one of the following, then press Ed it.— Hostname Change the name that can be used to address the FieldFox ifyour server supports this feature. The default hostname is generatedautomatically.— Obtain IP Choose from:—DHCP - IP Address is assigned dynamica lly. If your server supports thisfeature, the IP Address for the FieldFox is assigned each time it isstarted.—Static - Set the IP Address manually. The Address remains until youchange it.
