Keysight N9923-90001 User’s Guide205File ManagementPrintingPrintingThe current screen or selected files can be printed using a PCL-compatibleprinter (like older HP Deskjet printer) connected to one of the FieldFox USBports. Newer PCL3GUI photo and all-in-one printers are NOT supported.Measurements can also be printed using the FieldFox Data Link software.How to print the current screen or a saved fileTo save ink, first select an outdoor (w hite background) display color. Learn howin “How to set Display Colors” on page 211.— Connect the printer to a FieldFox USB port. The print softkey will appearONLY when a compatible printer is connected.— Thenpress Save/Recall 9— Then Print and choose from the following:—Printer & Page Setup - Confirm that the printer is connected andconfigured properly. The Status line should read “Ready’.— Make other print settings as desired.—Select Files for Printing - Print up to 16 *.PNG images on one pagethat are stored on the Internal drive. Images can NOT be printed fromthe USB and SD card.—Edit the Quick Settings table to select up to FOUR Rows and FOURColumns for up to 16 total images to be printed on a single page.—If necessary, edit the filenames to be printed.—Select Done. Then Print Selected Files to begin printing.——Print Current Screen – Immediately prints the FieldFox screenusing the selected Printer and Page Setup settings.
