Keysight N9923-90001 User’s Guide 157Pulse Measurements Mode – Option 330Pulse Measurement SettingsAuto AnalysisAuto Analysis reports the following TEN pulse measurements:How to enable Auto Analysis— Press Mrk ->/Tools.— Then Auto Analysis— Then choose from the following:— OFF Analysis OFF— ON The Analysis values appear below trace 1.1 - Average Power Average power level of allmeasured data points2 - Peak Power Highest reading of all measureddata points3 - Peak minusAverageDifference between the above tworesults4 - Pulse Top Power value based on the specifiedPulse Top setting.5 - Rise Time The time it takes for a pulse to risefrom 10% to 90% of its peak value.6 - Fall Time The time it takes for a pulse to fallfrom 90% to 10% of its peak value.7 - Pulse Width The time between the rising edgeand falling edge of a pulse.8 - Pulse Period The time of one complete pulse cycle9 - Duty Cycle The ratio of the pulse width / pulseperiod.10 - Pulse Rep Freq The rate, in pulses / sec, at whichpulses recur.
