21Keysight N9923A Handheld AnalyzerUser’s Guide2 Preparing for Initial Use of Your New FieldFoxCheck the ShipmentWhen you receive your FieldFox, check the shipment according to thefollowing procedure:1. Inspect the shipping container for damage. Signs of damage may includea dented or torn shipping container or cushioning material that indicatessigns of unusual stress or compacting. If not damaged, save thepackaging material in case the FieldFox needs to be returned2. Carefully remove the contents from the shipping container, and verify thatthe standard accessories and your ordered options are included in theshipment according to the Box Contents List3. For any question or problems, refer to “Contacting Keysight” on page 4Meeting Power Requirements for the AC/DC AdapterThe AC/DC adapter supplied with the analyzer is equipped with a three-wirepower cord, in accordance with international safety standards. The powercable appropriate to the original product shipping location is included with theFieldFox.Various AC power cables are available from Keysight that are unique to specificgeographic areas. You can order additional AC power cables that are correctfor use in different areas. For the power cord part number information pleasevisit: http://www.keysight.com/find/fieldfoxVoltage: 100 VAC to 250 VACFrequency: 50 Hz to 60 HzCurrent: 1.25 A (100 VAC) to 0.56 A (250 VAC)
