3 - DIRECT-TO63190-00356-00 Rev BSelecting a Destination from the Active FlightPlanIf you’re navigating an active flight plan, anywaypoint contained in the flight plan may be selectedas a direct-to destination from the select direct-towaypoint page. (see Section 4 - Flight Plans, for moreinformation on flight plans.)To select a direct-to destination from the activeflight plan:1. Press the direct-to key. The select drect-towaypont page wll appear, wth the waypontdentfier field hghlghted.2. Turn the large right knob to hghlght theflght plan (FPL) field.3. Turn the small right knob to dsplay a wndowshowng all wayponts n the actve flghtplan.4. Contnue turnng the small right knob toscroll through the lst and hghlght the desredwaypont.5. Press ENT to confirm the selected waypont,and ENT to actvate the drect-to functon.Selecting the Nearest Airport as a Direct-ToDestinationThe select direct-to waypoint page always displaysthe nearest airports (from your present position) onthe NRST field. Navigating directly to a nearby airportis always just a few simple steps away. (Nearby airportsmay also be selected as direct-to destinations using thesteps described Section 7 - NRST Pages - Navigating toa Nearby Waypoint.)To select a nearby airport as a direct-to destina-tion:1. Press the direct-to key. The select drect-towaypont page wll appear, wth the waypontdentfier field hghlghted.2. Turn the large right knob to hghlght thenearest arport (NRST) field.3. Turn the small right knob to dsplay a wndowshowng up to nne nearby arports.4. Contnue turnng the small right knob toscroll through the lst and hghlght the desredarport.5. Press ENT to confrm the selected arport, andENT to actvate the drect-to functon.NOTE: Performing a direct-to for the MAP of anactive approach will cancel approach mode.Selecting a Destination
