6 - WPT PAGES123190-00356-00 Rev BAirport Arrivals4. Press ENT. The cursor moves to the transtons(TRANS) field.5. Turn the small right knob to dsplay a wndowof avalable transtons. Contnue turnng thesmall right knob to select the desred trans-ton.6. Press ENT. The cursor moves to the runwayfield.7. Turn the small right knob to dsplay a wndowof avalable runways. Contnue turnng thesmall right knob to select the desred runway.(“ALL” may appear n the runway field, ndcat-ng the arrval procedure apples to all runways.For arports wth parallel runways, “B” mayappear at the end of the runway desgnatonto ndcate the arrval procedure apples to bothrunways.)8. Press ENT. To remove the flashng cursor, pressthe small right knob.Airport Arrival Page OptionsThe following options are available for the airportarrival page, by pressing the MENU key:Load into Active FPL?As described earlier in this section.Select Next FPL Apt?As described earlier in this section.Select Destination Apt?As described earlier in this section.Airport Departure PageThe airport departure page shows the available Air-port Standard Instrument Departure (SID) proceduresfor the selected airport. Where multiple runways ortransitions are associated with the departure proce-dure, that information may also be displayed. A mapimage provides a layout diagram for each departure,runway and transition.Departure ProcedureNameAirport Identifier,Symbol and TypeMap ImageSixth Pagein WPT groupRunwaysAssociatedwithDepartureTransitionsTo scroll through the available departures:1. Press the small right knob to actvate thecursor.
