9 - AUX PAGES169190-00356-00 Rev BSetup 1To change the units of measure:1. Select “Unts / Mag Var” from the Setup 1page.2. Turn the large right knob to hghlght thedesred unts of measure category. The fol-lowng categores, and correspondng unts ofmeasure, are avalable:• DIS, SPD—distance and speed in Nautical(nautical miles/knots), Statute (miles/milesper hour) or Metric (kilometers/kilometers perhour) terms.• ALT, VS—altitude and vertical speed in Feet/feet per minute, Meters/meters per minute, orMeters/meters per second.• PRESSURE—barometric setting in Inches orMillibars.• TEMP—temperature in degrees Celsius orFahrenheit.• FUEL—fuel units in Gallons, Imperial Gal-lons, Kilograms, Liters or Pounds.3. Turn the small right knob to select the desredunts of measure for the selected category.Press ENT to accept the selecton.Position FormatTo change the position format:1. Select “Poston Format / Map Datum” fromthe Setup 1 page.2. The flashng cursor s on the poston formatfield. Turn the small right knob to select thedesred poston format. The followng postonformats are avalable:• hddd°mm.mmm’—latitude and longitude indegrees and decimal minutes• hddd°mm’ss.s”—latitude and longitude indegrees, minutes and decimal seconds• MGRS—Military Grid Reference System• UTM/UPS—Universal Transverse Mercator /Universal Polar Stereographic grids3. Press ENT to accept the selected format.