6 - WPT PAGES113190-00356-00 Rev BWPT Page GroupSection 6WPT PagesWPT Page GroupThe Waypoint (WPT) page group provides infor-mation about the thousands of airports, VORs, NDBs,intersections, runways, frequencies, and proceduresstored on your Jeppesen NavData® card. A WPT pageis also provided to display information for up to 1,000user-created waypoints.To quickly select a WPT page:1. From any page, press and hold CLR to selectthe default NAV page. (You may skp ths stepf you are already vewng any of the manpages.)2. Turn the large right knob to select the WPTpage group. “WPT” wll appear n the lowerrght corner of the screen.3. Turn the small right knob to select the desredWPT page.NOTE: Please note that your 400W-series uses ICAO identiifers for all airports. All U.S. airport identiifers whichcontain only letters use the preifx “K”. For example, Los Angeles International is KLAX under the ICAO standard.Other airports, such as Otten Memorial (3VS), that contain numbers in the identiifer, do not require the “K” preifx.Many foreign countries use two letter preifxes.Airport Location Airport Runway Airport Frequency Airport Approach Airport Arrival Airport DepartureIntersection NDB VOR User WaypointNAV7+ available pages(see Section 2)WPT10 available pages(see list below)AUX4 available pages(see Section 9)NRST8 available pages(see Section 7)