Garmin GPS 400W Pilot's Manual & Reference

Also see for GNC 420AW: Maintenance manual Pilot's guide addendum Quick reference guide Pilot's Guide & Reference Pilot's Guide & Reference

Contents

Garmin GPS 400W Pilot's Manual & Reference Manual pdf 164 page image

9 - AUX PAGES154 190-00356-00 Rev BFlight Planning4. Turn the large right knob to hghlght thedeparture tme (DEP TIME) field.5. Use the small and large right knobs to enterthe departure tme. Press ENT when finshed.(Departure tme may be entered n local or UTCtme, dependng upon unt settngs.)6. The flashng cursor moves to the ground speed(GS) field. Use the small and large rightknobs to enter the ground speed. Press ENTwhen finshed.7. Wth all varables entered, the followng nfor-maton wll be provded:• DTK— Desired track, or desired course• DIS— Distance• ETE— Estimated time en route• ESA— En route safe altitude• ETA— Estimated time of arrivalDensity Alt / TAS / WindsTo calculate density altitude, true airspeed, windsaloft:1. Select “Densty Alt / TAS / Wnds” from theflght plannng page.2. The flashng cursor hghlghts the ndcated alt-tude (IND ALT) field. Use the small and largeright knobs to enter the alttude ndcated onyour altmeter. Press ENT when finshed.3. The flashng cursor moves to the calbratedarspeed (CAS) field. Use the small and largeright knobs to enter the arspeed from yourarspeed ndcator. Press ENT when finshed.4. The flashng cursor moves to the barometrcsettng (BARO) field. Use the small and largeright knobs to enter the barometrc settng(altmeter settng). Press ENT when finshed.5. The flashng cursor moves to the total ar tem-perature (TAT) field. Use the small and largeright knobs to enter the temperature. PressENT when finshed.