3 - DIRECT-TO62 190-00356-00 Rev BSelecting a DestinationSelecting a Destination by Facility Name orCityIn addition to selecting a destination by identi-fier, the select direct-to waypoint page also allows youto select airports, VORs and NDBs by facility name orcity location. If duplicate entries exist for the enteredfacility name or city, additional entries may be viewedby continuing to turn the small right knob during theselection process.FacilityNameIdentifier, Symboland Region Flight PlanFieldCityNearestAirportFieldTo select a direct-to destination by facility nameor city:1. Press the direct-to key. The select drect-towaypont page wll appear, wth the waypontdentfier field hghlghted.2. Turn the large right knob to hghlght thefaclty name (second lne; see above) or thecty (thrd lne; see above) field.3. Use the small and large right knobs to enterthe faclty name or cty locaton of the desreddestnaton waypont. As you spell the facltyname or cty, the 400W-seres Spell’N’Fndfeature wll select the first entry n the databasebased upon the characters you have enteredup to that pont.4. Contnue turnng the small right knob toscroll through any addtonal database lstngsfor the selected faclty name or cty. You canalso scroll backwards wth the small rightknob f you scroll past the desred waypont.5. Press ENT to confirm the selected waypont,and ENT to actvate the drect-to functon.To select the direct-to destination by facilityname (shown above) or city location (shownbelow), highlight the second or third line onthe direct-to waypoint page. Use the small andlarge right knobs to enter the facility name orcity. The identifier(s) for any matching entrieswill appear on the top line of the page.
