UMN:CLI User ManualV8102360unicast: unicast queuenon-unicast: non-unicast queueno qos buffer egress {<0-7> |all} max-limit {unicast | non-unicast}Removes the buffer cell limit values.no qos buffer egress {<0-7> |all} min-limit {unicast | non-unicast}To display the configured guaranteed buffer size of the port and queue number, use thefollowing command.Command Mode Descriptionshow qos buffer-config {gigabitethernet| tengigabitethernet | gpon } IFPORT{unicast | non-unicast}EnableGlobalShows the configured guaranteed buffer size ofthe port.show interface queue-status all {unicast| non-unicast} Shows the unicast/multicast packet buffer usagestatus per queue.IFPORTS: interface port numberunicast: unicast trafficnon-unicast: multicast trafficshow interface queue-status cpushow interface queue-status {giga-bitethernet | tengigabitethernet | gponIFPORT {unicast | non-unicast}show interface statistics {avg-perq |buffer } all {unicast | non-unicast}Shows the traffic statistics of buffer or the aver-age packet per queue for all Ethernet/PONports.unicast: unicast trafficnon-unicast: multicast trafficshow interface statistics {avg-perq |buffer } cpuShows the incoming traffic statistics of buffer orthe average packet per queue into CPU.show interface statistics {avg-perq |buffer } {gigabitethernet | tengiga-bitethernet | gpon } IFPORT {unicast |non-unicast}Shows the traffic statistics of buffer or the aver-age packet per queue for a specified Ether-net/PON port.IFPORTS: interface port numberunicast: unicast trafficnon-unicast: multicast traffic9.3.10.5 Displaying QoSTo display the configuration of QoS, enter following command.Command Mode Descriptionshow qos EnableGlobalInterface[XE/GE/GPON]Shows the configuration of QoS for all ports.show qos interface {giga-bitethernet | tengigabitether-net | gpon } IFPORTShows the configuration of QoS per each port.show qos cpu EnableGlobalShows the configuration of QoS for CPUpackets.
