User Manual UMN:CLIV81021657.3.2.1 Subject of RMON AlarmYou need to configure RMON alarm and identify subject using many kinds of data fromalarm. To identify subject of alarm, use the following command.Command Mode Descriptionowner NAME RMON Identifies subject using relevant data, enter the name(max. 32 characters).7.3.2.2 Object of Sample InquiryTo assign object used for sample inquiry, use the following command.Command Mode Descriptionsample-variable MIB-OBJECT RMON Assigns MIB object used for sample inquiry.7.3.2.3 Absolute and Delta ComparisonThere are two ways to compare with the threshold: absolute comparison and delta com-parison.• Absolute ComparisonComparing sample data with the threshold at configured interval, if the data is morethan the threshold or less than it, alarm is occurred• Delta ComparisonComparing difference between current data and the latest data with the threshold, ifthe data is more than the threshold or less than it, alarm is occurred.To compare object selected as sample with the threshold, use the following command.Command Mode Descriptionsample-type absolute RMON Compares object with the threshold directly.To configure delta comparison, use the following command.Command Mode Descriptionsample-type delta RMON Compares difference between current data and thelatest data with the threshold.7.3.2.4 Upper Bound of ThresholdIf you need to occur alarm when object used for sample inquiry is more than upper boundof threshold, you have to configure the upper bound of threshold. To configure upperbound of threshold, use the following command.Command Mode Descriptionrising-threshold VALUE RMON Configures upper bound of threshold.VALUE: 0-2147483647
