User Manual UMN:CLIV8102317mapping s-vid <1-4094> trans-s-vidno vlan dot1q-tunnel ingress range-mappings-vid <1-4094> trans-s-vid9.1.5.3 One-to-Two VLAN Mapping between S-VID and C-VIDTo configure one-to-two VLAN mapping and translation, use the following command.Command Mode Descriptionvlan dot1q-tunnel ingressmapping PORTS s-vid <1-4094>trans-s-vid <1-4094> trans-c-vid<1-4094>Interface[XE/GE/GPON]Configures 1:2 VLAN mapping for NNI port and trans-lates incoming Single Outer Tagged (SOT) packet withgiven S-VLAN tag to Double Tagged (DT) packet byadding S-VLAN and C-VLAN tags.PORTS: NNI port numbervlan dot1q-tunnel egressmapping s-vid <1-4094> trans-s-vid <1-4094> trans-c-vid <1-4094>Configures 1:2 VLAN mapping for NNI port and trans-lates outgoing Single Outer Tagged (SOT) packet withgiven S-VLAN tag to Double Tagged (DT) packet byadding S-VLAN and C-VLAN tags.PORTS: NNI port numbervlan dot1q-tunnel ingress range-mapping s-vid <1-4094> trans-s-vid <1-4094> trans-c-vid <1-4094>Configures 1:2 VLAN mapping for NNI port and trans-lates incoming Single Outer Tagged (SOT) packet inthe given S-VLAN range to Double Tagged (DT) packetby adding S-VLAN and C-VLAN tags.To delete the configured one-to-two VLAN mapping and translation, use the followingcommand.Command Mode Descriptionno vlan dot1q-tunnel ingressmapping s-vid <1-4094> trans-s-vid trans-c-vidInterface[XE/GE/GPON]Deletes the configured 1:2 VLAN mapping and transla-tion.no vlan dot1q-tunnel egressmapping s-vid <1-4094> trans-s-vid trans-c-vidno vlan dot1q-tunnel ingressrange-mapping s-vid <1-4094>trans-s-vid trans-c-vid9.1.5.4 Two-to-One VLAN Mapping between S-VID and C-VIDTo configure two-to-one VLAN mapping and translation, use the following command.Command Mode Descriptionvlan dot1q-tunnel ingressmapping s-vid <1-4094> c-vidInterface[XE/GE/GPConfigures 2:1 VLAN mapping for NNI port and trans-lates S-VLAN and C-VLAN tags of incoming Double
