Canon B115 User Manual

Contents

Canon B115 User Manual Manual pdf 8 page image

7 USING THE BUILT-IN ANSWERING MACHINE(TAM MODE) (FAX-B140 only)77-1USING THE BUILT-IN ANSWERINGMACHINE (TAM MODE) (FAX-B140 only)Recording the outgoing messageBefore you use TAM MODE, you must record an outgoing message. Use the microphone on the operationpanel to record your outgoing message. Only one outgoing message, no longer than 20 seconds, can berecorded.Types of messages that can be recorded ________Recording the outgoing message ______________To record another type of message, select the type of message you want to record in step 1, and then followthe procedure below to record it.OUTGOING MESSAGE: Answering machine messageALT OUTGOING MSG: Answering message only, used when the recording time is set to 0 or thememory is full. Caller cannot leave a message.VOICE MEMO: See p. 7-6.FAXTEL MESSAGE: Message played when the Fax/Tel mode is set.FORWARDING MSG: Message played when any new telephone messages are forwarded to aforwarding number.1 Use [3] or [4] to select OUTGOING MESSAGE.2 Press [Record] and speak into the microphone torecord your outgoing message.The remaining recording time is displayed on the LCD.-or-Press [Start/Copy], use [3] or [4] to selectRECORD and press [Start/Copy] again. Then speakinto the microphone to record your outgoingmessage.3 Press [Stop] twice when recording is finished.You can record an alternative outgoing message, fax/telephone switching message or forwarding message byselecting the appropriate option in step 1 above and thencontinuing on to steps 2 and 3.NoteYou cannot delete the OUTGOING MESSAGE. To record a new outgoing message, repeat steps 1to 3 above. The old outgoing message will be automatically deleted when you record your newmessage.TIME LEFT 19