7-12Forwarding telephone messagesThis feature allows you to automatically forward telephone messages, recorded when the fax is set to TAMMODE, to a registered forwarding number.You can use remote control to access the forwarding number and listen to your telephone messages.Setting the forwarding number ________________Note• You must register a forwarding number and set TAM MODE before you can use this feature. Remotecontrol cannot be used to set this feature unless a forwarding number has been registered.• If you set FWD SETTINGS to ON when a forwarding message has not been recorded, you will hear atone instead of a forwarding message when telephone messages are forwarded.1 Press [Function].DPress [Start/Copy].2 Use [3] or [4] to select TAM SETTINGS.DPress [Start/Copy].3 Use [3] or [4] to select FWD SETTINGS.DPress [Start/Copy].4 Use [3] or [4] to select ON.DPress [Start/Copy] twice.5 Use the numeric buttons to enter the forwardingnumber.A maximum of 40 digits can be entered.DPress [Start/Copy].6 Press [Stop].Setting ends and the fax returns to standby mode.USER SETTINGSMESSAGE LENGTHOFFTEL=
