Canon B115 User Manual

Contents

Canon B115 User Manual Manual pdf 40 page image

8-4RX SETTINGS* Only available in some countries.PRINTER SETTINGSName Description SettingsECM RX Enable/disable error correction during reception. ON/OFFFAX/TEL AUTO SW Enable/disable FAX/TEL switchover. When ON, this feature answers calls,and if no fax tone is detected, the fax rings to alert you of an incoming call.RING START TIME Set the duration that the fax listens for a fax tone before starting to ring. 8 seconds (0 to 30)F/T RING TIME Set the length of time the fax will ring to alert you of an incoming call. 22 seconds (10 to 60)DEFAULT ACTION Select the action taken after the F/T RING TIME expires. DISCONNECT/RECEIVEINCOMING RING When the handset or an extension phone is connected, set the fax to ringwhen it receives a call.ON/OFFRING COUNT Set the number of incoming rings before the fax answers. 2 times (1 to 99)MAN/AUTO SWITCH Determine if the fax switches to document receive mode after the fax ringsfor a specified time when the fax is in the manual receive mode.ON/OFFRING TIME Set the amount of time the fax will ring before switching to documentreceive mode. 15 seconds (1 to 99)REMOTE RX Enables/disables remote receiving. ON/OFFREMOTE RX ID If you set REMOTE RX to ON, you can select the remote receiving ID. 25 (00 to 99)MEMORY RX Turn on/off memory receiving of a document. ON/OFFCALLER ID* Determine if the fax displays the caller’s name and fax number whenreceiving a call.ON/OFFName Description SettingsRX REDUCTION Enable/disable reduction for received documents. ON/OFFFIXED REDUCTION Select the reduction rate. STANDARD/A41LTR/LGL1LTRREDUCE DIMENSION Select reduction in height only or both width and height. VERTICAL ONLY/HORIZ & VERTICALPAPER SIZE Select the size of the loaded fax paper. A4/LTR/LGL