8-3Selecting a menu8 SETTINGS AND ACTIVITY REPORTSREPORT SETTINGSTX SETTINGSName Description SettingsTX REPORT Enable/disable automatic printing of the transmission report.OUTPUT NO: Turn off the activity report feature.OUTPUT YES: Set the fax to print an activity report every time you send adocument.PRINT ERROR ONLY: Print only when an error occurs during sending.OUTPUT NO/OUTPUT YES/PRINT ERROR ONLYRX REPORT Enable/disable automatic printing of the reception report.OUTPUT NO: Turn off the activity report feature.OUTPUT YES: Set the fax to print an activity report every time you receivea document.PRINT ERROR ONLY: Print only when an error occurs during receiving.OUTPUT NO/OUTPUT YES/PRINT ERROR ONLY/ACTIVITY REPORT Enable/disable automatic printing of the activity report. -AUTO PRINT When you set ON, your fax is set to print an activity report for every 20transactions (sending and receiving). OUTPUT NO/OUTPUT YESTX/RX SEPARATE Divide the activity management report into sending and receivingtransactions. ON/OFFName Description SettingsECM TX Enable/disable error correction during transmission. ON/OFFMID PAUSE SET Set the length of the pause you insert into a dialling sequence. 4 seconds (1 to 15)AUTO REDIAL Determine whether the fax will redial a number if it fails to get a responseon the first attempt.ON/OFFREDIAL TIMES Set the number of retries. 2 times (1 to 10)REDIAL INTERVAL Set the period of time between redialling attempts. 2 minutes (2 to 99)
