9-7Periodic cleaning9 SOLUTIONS TO COMMON PROBLEMS3 Raise the cartridge lock lever a on thecartridge holder and remove the BJcartridge b.4 Remove the new BJ cartridge from itspackage, then remove the orangeprotective cap a and tape b.• Discard the old BJ cartridge immediatelyaccording to the local laws and regulations fordisposal of consumables. You may want to placeit in a plastic bag to keep any residual ink fromspilling.• Spilled ink can stain any surface; protect yourselfand your work area.• Discard the cap and tape. Never attempt toreattach them to the BJ cartridge print head.• Install the BJ cartridge immediately afterremoving the cap and tape.• Spilled ink can stain any surface; protect yourselfand your work area.5 With the label facing outwards, insert theBJ cartridge into the cartridge holder a.Lower the cartridge lock lever b until youhear a click to lock the cartridge in place.The white post (BJ cartridge guide) should bevisible through the slot.The BJ cartridge tilts slightly to the left in theloaded position.6 Close the printer cover.If the AUTO TEST PRINT setting is set toON:The fax automatically prints a test page.The fax prints a test page every time youinsert a BJ cartridge.• Load the paper in the multi-purpose tray beforeyou replace the BJ cartridge.• You can turn off automatic test printing bychanging the AUTO TEST PRINT setting. SeeSYSTEM SETTINGS, p. 8-5.121212
