1-12Setting the TEL LINE TYPESee pp. 2-2, 2-3 for the buttons on the operation panel.Dialling through a switchboard (PBX)A PBX (private branch exchange) is an on-site telephone switchboard.• If your fax is connected through a switchboard, dial an outside line access number first. Then dial the restof the number.• If you want to dial with automatic dialling, you may have to insert a pause between the outside line numberand the telephone number when you register the number for one-touch or coded speed dialling.• When the fax is connected to a PBX or other telephone switching system, you can register the access typeand outside access line number under the [R] button (see p. 1-13). Once you have registered them, yousimply need to press [R] before dialling a fax or telephone number.1 Press [Function].DPress [Start/Copy] twice.2 Use [3] or [4] to select TEL LINE TYPE.DPress [Start/Copy].3 Use [3] or [4] to select TOUCH TONE.DPress [Start/Copy].4 Press [Stop].Setting ends and the fax returns to standby mode.DATE & TIMEROTARY PULSER-KEY SETTING
