1-6Connecting the AC power cord ________________Plug the fax into a 200-240 volt AC 50/60 Hz outlet.Setting the language and country ______________When you plug in the fax for the first time, you need to select the correct language for the LCD display andreports, and the country* of use. See pp. 2-2, 2-3 for the buttons on the operation panel.1 Plug the power cord connector into therear of the fax. 2 Plug the other end of the power cord intoa properly grounded AC power outlet.NoteThere is no power switch on the fax. The power is on as long as the fax is plugged in.1 Press [Start/Copy].2 Use [3] or [4] to select the preferred language forthe LCD display and reports.DPress [Start/Copy].Wait a second for COUNTRY SELECT* to appear.DPress [Start/Copy].3 Use [3] or [4] to select the country where you areusing the fax*.DPress [Start/Copy].Registration ends and the fax enters standby mode.EUROPE* This setting is only available for some countries.
