Canon B115 User Manual

Contents

Canon B115 User Manual Manual pdf 30 page image

9-13Troubleshooting9 SOLUTIONS TO COMMON PROBLEMSCopying problems __________________________o The fax does not make a copy.The BJ cartridge may need to be replaced.• Determine if the problem is with the BJ cartridge and replace if necessary (see p. 9-6).The document may not have been loaded correctly into the document tray.• Remove the document, stack it if necessary, and load it into the document tray correctly (see p. 3-2).• Make sure the printer cover is closed.The BJ cartridge may not be installed properly.• Make sure the BJ cartridge is installed properly (see p. 1-9).The fax may not be operating properly.• Print the nozzle check pattern (see p. 9-5).o MEMORY FULL appears on the LCD when making multiple copies.The fax’s memory is full.• Print or delete any documents stored in memory (see pp. 5-14, 5-15) to free up space in the fax’smemory, then start again.• If you have any page fed out without being copied, simply try copying those pages again.• Change the scanning resolution and try copying again.The document you are copying may have too many graphics.• If multiple pages are being copied, separate the pages into smaller stacks. If not, make the desirednumber of copies one at a time as needed.Telephone problems ________________________o You cannot dial.The telephone line may not be connected properly.• Make sure all line connections are secure (see p. 1-4).The power cord may not be plugged in securely.• Check that the power cord is plugged securely into the fax and into the wall outlet (see p. 1-6). If thefax is plugged into a power strip, make sure the power strip is plugged in and turned on.The fax may not be set for the type of telephone line in use (pulse/tone).• Make sure the fax is set for the correct telephone line type (see p. 1-12).o The handset, telephone, or extension phone disconnects while you aretalking.The power cord may not be plugged in securely.• Check that the power cord is plugged securely into the fax and into the wall outlet (see p. 1-6). If thefax is plugged into a power strip, make sure the power strip is plugged in and turned on.o There is interference on the line.A mobile phone or cordless phone may be in use near the fax.• Make sure that mobile phones and cordless phones are not used near the fax.NoteFor additional troubleshooting, see Print quality problems, p. 9-14.