5-2Sending methods___________________________K Direct sending (see below)K Memory sending (see p. 5-3)K Manual sending (see p. 5-4)Dialling methods ___________________________There are several methods of dialling the receiving party’s number, depending on how your fax is set up.K Regular diallingK One-touch speed dialling (see p. 5-5)K Coded speed dialling (see p. 5-5)K Directory dialling (see p. 5-6)K UCanTalk (see p. 5-7)Sending documentsDirect sending _____________________________1 Load the document face up into the document tray.See Loading documents, p. 3-2.You can set the scanning resolution and contrast (see p. 5-1).2 Dial the receiving party’s fax number.Use one of the dialling methods described in this chapter.3 Press [Start/Copy] twice.The fax begins sending.Note• If an error occurs during sending, the fax beeps intermittently for a few seconds and an errormessage appears on the LCD. If this happens, correct the error and then press [Stop], then trysending the document again. See LCD messages, p. 9-15.• The fax automatically redials if the receiving party does not answer or if the line is busy. (You canspecify the number of times it redials; see AUTO REDIAL, p. 8-3.)TEL= 34567890
