Canon B115 User Manual

Contents

Canon B115 User Manual Manual pdf 34 page image

9-17LCD messages9 SOLUTIONS TO COMMON PROBLEMSCLEAR PAPER JAM There is a paper jam. Clear the paper jam (see p. 9-1)and reload paper in the multi-purpose tray. Press [Stop].DATA ERROR An error has occurred and allone-touch speed dialling, codedspeed dialling, and user datahave been lost.Press [Start/Copy], then re-register the data (seeChapter 2).DOC. TOO LONG The document is longer than750 mm.Use a copier to make a reducedcopy of the document and thensend the copy.ECM RX The fax is receiving a documentusing Error Correction Mode(ECM).ECM receptions may takelonger than normal receptions.Turn off ECM if you need toreceive quickly, or if you knowyour local lines are in goodcondition (see ECM RX, p. 8-4).ECM TX The fax is sending a documentusing Error Correction Mode(ECM).ECM transmissions may takelonger than normaltransmissions. Turn off ECM ifyou need to transmit quickly, or ifyou know your local lines are ingood condition (see ECM TX,p. 8-3).MEMORY FULL The fax’s memory is fullbecause it has received toomany documents, or a very longor detailed document.Print any documents stored inmemory (see p. 5-14).Then start again.The fax’s memory is fullbecause you either tried to sendtoo many pages at once, or youtried to send a very long ordetailed document.Free up space in the fax’smemory by printing or deletingany documents in memory youno longer need (see pp. 5-14,5-15).If multiple pages are loaded,separate the pages into smallerstacks. If not, try sending thedocument by direct sending(see p. 5-2).MSG DATA LOST An error has occurred and allvoice message data has beenlost.Re-record all answeringmachine messages, such as theoutgoing message andalternative outgoing message(see p. 7-1).Message Cause Action