Canon B115 User Manual

Contents

Canon B115 User Manual Manual pdf 38 page image

8-2USER SETTINGSName Description SettingsDATE & TIME Set the date and time (24-hour clock) using the numeric buttons. -UNIT TELEPHONE # Enter your fax number using the numeric buttons. -UNIT NAME This is the name that appears at the top of each fax page you send (see p.2-6).-TX TERMINAL ID This option sets the parameters for the identification header that appearson every page you send.ON/OFFTTI POSITION Select the position of the TTI. INSIDE IMAGE/OUTSIDE IMAGETELEPHONE # MARK Select the icon for the fax number. TEL/FAXSCAN CONTRAST Set the density of the reproduction. STANDARD/DARKER/LIGHTEROFFHOOK ALARM Enable/disable the off hook alarm. The alarm alerts you that the handset isnot seated properly in its cradle. ON/OFFVOLUME CONTROL Set the volume of the fax sounds. -LINE MONITOR VOL Set the volume of the line monitor (sound during dialling). 0 (off)/1/2/3CALLING VOLUME Set the volume of the ring produced when the fax detects a voice callduring FAX/TEL switchover.1/2/3ALARM VOLUME Set the volume of the error alarm sound. 0 (off)/1/2/3KEYPAD VOLUME Set the volume of the keypad. 0 (off)/1/2/3RX CALL LEVEL Set the ring tone. STANDARD/HIGHTEL LINE TYPE Set the dialling method the fax uses to match the type of phone line youhave.TOUCH TONE/ROTARY PULSER-KEY SETTING Set the type of PBX through which your fax is connected. PSTN/PBXPSTN Your fax is connected to an outside line. -PBX: ACCESS TYPE Your fax is connected through a PBX. PREFIX/HOOKINGACCESS NUMBER If you select PREFIX, you can enter an outside line number of up to 19digits.-AUTO VOICE DIAL Enable/disable automatic dialling for UCanTalk. ON/OFF