vPhaser 3635MFP Health and Safety Incident reportingIntroductionDraft 4Health and Safety Incident reportingI. SummaryThis section defines requirements for notification of health and safety incidents involving Xeroxproducts (equipment and materials) at customer locations.II. ScopeXerox Corporation and subsidiaries worldwide.III. ObjectiveTo enable prompt resolution of health and safety incidents involving Xerox products and toensure Xerox regulatory compliance.IV. DefinitionsIncident:An event or condition occurring in a customer account that has resulted in injury, illness orproperty damage. Examples of incidents include machine fires, smoke generation, physicalinjury to an operator or service representative. Alleged events and product conditions areincluded in this definition.V. RequirementsInitial Report:1. Xerox organisations shall establish a process for individuals to report product incidents toXerox Environment Health & Safety within 24 hours of becoming aware of the event.2. The information to be provided at the time of reporting is contained in Appendix A (Healthand Safety Incident Report involving a Xerox product).3. The initial notification may be made by any of the following methods:• For incidents in North America and Developing Markets West (Brazil, Mexico, LatinAmerican North and Latin American South):– Phone* Xerox EH&S at: 1-800-828-6571.– Electronic mail Xerox EH&S at: Doris.Bush@xerox.com.– Fax Xerox EH&S at: 1-585-422-6449 [intelnet 8*222 6449].• For incidents in Europe and Developing Markets East (Middle East, Africa, India,China and Hong Kong):– Phone* Xerox EH&S at: +44 (0) 1707 353434.– Electronic mail Xerox EH&S at: Elaine.Grange@xerox.com.– Fax Xerox EH&S at: +44 (0) 1707 353914 [intelnet 8*668 3914].*Initial notification made by phone must be followed within 24 hours by a completed inci-dent report and sent to the indicated electronic mail address or fax number.NOTE: If sending a fax, please also send the original via internal mail.Responsibilities for resolution:1. Business Groups/Product Design Teams responsible for the product involved in the inci-dent shall:a. Manage field bulletins, customer correspondence, product recalls, safety retrofits.b. Fund all field retrofits.2. Field Service Operations shall:a. Preserve the Xerox product involved and the scene of the incident inclusive of anyassociated equipment located in the vicinity of the incident.b. Return any affected equipment/part(s) to the location designated by Xerox EH&Sand/or the Business Division.c. Implement all safety retrofits.3. Xerox EH&S shall:a. Manage and report all incident investigation activities.b. Review and approve proposed product corrective actions and retrofits, if necessary.c. Manage all communications and correspondence with government agencies.d. Define actions to correct confirmed incidents.VI. AppendicesThe Health and Safety Incident Report involving a Xerox Product (Form # EH&S-700) is avail-able in the following locations:• On electronic documentation (EDOC), located in the folder \safety.• In the hardcopy, located at the end of the manual.
