Xerox Phaser 3635MFP Service Manual

Also see for 3635MFP - Phaser B/W Laser: Features Brochure & specs User guide User guide Quick use guide

Contents

Xerox Phaser 3635MFP Service Manual Manual pdf 159 page image

4-43Phaser 3635MFP REP 28.2, REP 28.3Repairs and AdjustmentsDraft 4Figure 2 Outbin assembly removalReplacement1. Replacement is the reverse of the removal procedure.REP 28.3 Front Mid CoverParts List on PL 28.10RemovalWARNINGSwitch off the electricity to the machine. Disconnect the power cord from the customersupply while performing tasks that do not need electricity. Electricity can cause death orinjury. Moving parts can cause injury.WARNINGTake care during this procedure. Sharp edges may be present that can cause injury.CAUTIONBefore performing this procedure, refer to General Disassembly Precautions, GP 10.1. Remove the DADF, PL 5.10 Item 1.2. Remove the UI assembly, REP 2.1.3. Remove the left cover, right cover and rear cover, REP 28.1.4. Remove the scanner assembly, REP 14.1.5. Remove the front cover assembly, PL 28.10 Item 7.6. Remove the 12 screws that secure the outbin assembly, refer to REP 28.2.7. Remove the 4 screws that secure the front mid cover, PL 28.10 Item 6.8. Carefully lift the front of the outbin assembly, then remove the front mid cover.Replacement1. Replacement is the reverse of the removal procedure.1Remove 6 screws.2Remove the outbin assemblytowards the front of themachine.Exit roll and idlers