6-36 Phaser 3635MFPdC131, dC132Draft 4General Procedures and InformationdC132 NVM InitializationRefer to the relevant section:• NVM Initialization - Copier• NVM Initialization - Network• NVM Initialization - Fax CardNVM Initialization - CopierPurposeTo return the copier NVM settings to default. Refer to dC131.Procedure1. Enter diagnostics, GP 1.2. Select Diagnostic Routines.3. Select Copier Routines, then 132 NVM Initialization - Copier.4. Touch the appropriate button to select the NVM to be initialized and follow the screeninstructions. Refer to Table 1, for the functions that are reset to default:• All Copier NVM• Machine Variable NVM• SA/KO Dust Off• System Counters Dust Off5. Switch off the machine, then switch on the machine.20-810 Fax Transmis-sion LevelAdjusts the fax transmis-sion level0 to 15dBm 1220-830 Auto Dial Time-outAdjusts the auto dial tim-eout10 to 100 seconds 5520-840 FAX Batch SendEnableFax batch send enable Off (0)On (1)020-900 FAX Total SendCounterTotal of sent fax pages. 0-0xffffffff 020-910 FAX TotalReceive CounterTotal of received faxpages.0-0xffffffff 0Table 5 NVM chain 20Location NVM Name NVM Description Value DefaultTable 1 Copier NVMCopier file type CategoryAll CopierNVMMachineVariable NVMSA/KO DustOffSystemCountersDust OffNVM System Usage Counter Y YNVM Fault Counter Y YNVM Diag Counter Y YNVM SAKO Setting Y YNVM Fault Log YNVM Configuration YNVM Diagnostics YNVM Debug YNVM Mach Var Y YNVM Mach Var Zero Y YNVM Mach Var Registration Y YNVM Mach Var Paper Path Y YNVM Mach Var DADF Y YNVM Mach Var Platen Y YNVM Auditron Y YNVM Crash Recovery YNVM Completed Job Log Y
