5-21Phaser 3635MFP PL 8.17Parts ListDraft 4PL 8.17 Tray 2 Assembly (2 of 2)Item Part Description1 130N01274 Tray 2 paper empty sensor (Q07-210)2 – Tray 2 paper empty sensor actuator(P/O PL 8.15 Item 28)3 – Static eliminator fixing (P/O PL 8.15Item 28)4 – Left underside cover (P/O PL 8.15Item 28)5 – Right underside cover (P/O PL 8.15Item 28)6 – Pickup idler (P/O PL 8.17 Item 31)7 – Pickup rubber (P/O PL 8.17 Item31)8 – Pickup roll shaft (P/O PL 8.15 Item28)9 – Static eliminator (P/O PL 8.15 Item28)10 – Pickup roll (P/O PL 8.17 Item 31)11 – Feed roll holder (P/O PL 8.15 Item28)12 – Feed roll (P/O PL 8.15 Item 28)13 – KL-clip (P/O PL 8.15 Item 28)14 – Bearing (P/O PL 8.15 Item 28)15 – Pickup roll cam (P/O PL 8.15 Item28)16 – Ground strip (P/O PL 8.15 Item 28)17 – Feed shaft (P/O PL 8.15 Item 28)18 – Feed gear (P/O PL 8.15 Item 28)19 – Snap on washer (P/O PL 8.15 Item28)20 – Outer pickup gear spring (P/O PL8.17 Item 30)21 – Pickup cam spring (P/O PL 8.15Item 28)22 – Outer pickup gear (P/O PL 8.17Item 30)23 – Inner pickup gear (P/O PL 8.17Item 30)24 121N01164 Tray 2 pickup solenoid (SOL08-820) (REP 7.4)25 140N63300 Tray 2 PWB26 – PWB cover (P/O PL 8.15 Item 28)27 – Pickup cam (P/O PL 8.15 Item 28)28 – Pick up gear core (P/O PL 8.15Item 28)29 152N11752 Tray 2 harness30 007N01593 Clutch assembly31 022N02345 Pickup roll assembly (NOTE)NOTE: HFSI. To reset the HSFI count go to GP 16.
