Xerox Phaser 3635MFP Service Manual

Also see for 3635MFP - Phaser B/W Laser: Features Brochure & specs User guide User guide Quick use guide

Contents

Xerox Phaser 3635MFP Service Manual Manual pdf 158 page image

4-42 Phaser 3635MFPREP 28.2Draft 4Repairs and AdjustmentsREP 28.2 Outbin AssemblyParts List on PL 28.10RemovalWARNINGSwitch off the electricity to the machine. Disconnect the power cord from the customersupply while performing tasks that do not need electricity. Electricity can cause death orinjury. Moving parts can cause injury.WARNINGTake care during this procedure. Sharp edges may be present that can cause injury.CAUTIONBefore performing this procedure, refer to General Disassembly Precautions, GP 10.1. Remove the DADF, PL 5.10 Item 1.2. Remove the UI assembly, REP 2.1.3. Remove the left cover, right cover and rear cover, REP 28.1.4. Remove the scanner assembly, REP 14.1.5. Remove the stapler assembly, PL 11.10 Item 4.6. Disconnect the following harnesses from the Connection PWB:• CN7• CN1• CN27. Remove the exit cover assembly, PL 28.10 Item 2.8. Disconnect the following harnesses from the Main PWB:• CN7• CN14• CN15• CN269. Prepare to remove the outbin assembly, Figure 1.Figure 1 PreparationCAUTIONTake care not to damage the main PWB location spigot when removing the outbin, refer to Fig-ure 1. Also, take care not to move the exit roll and idlers.10. Remove the outbin assembly, Figure 2.1Remove 6 screws marked A.Main PWB location spigot